Taking over a fuel station – how to prepare a brand change (checklist)
In short: start the brand change of a fuel station you have taken over by reviewing everything drivers see from the road. That means the price sign, canopy fascia, column cladding, directional signage, lighting and the building façade. For each element, decide whether it needs replacing or whether it is enough to adapt it to the new identity. Then plan the work to limit interruptions to sales.
Stations change colours for various reasons. A station may have a new owner or a new contract with a fuel supplier. It may also be leaving a network for its own brand. In each case, the list of elements to review is similar. Below you will find it in a form you can go through on site, phone in hand.
What a fuel station brand change involves
A fuel station’s identity is spread over several structures. Each has its own material, dimensions and mounting method. The new logo and colours have to be transferred to:
- the price sign by the road,
- the canopy fascia above the dispensers,
- the canopy column cladding,
- entry, exit and zone signage on the station premises,
- canopy lighting and illuminated elements,
- the building façade and additional elements, e.g. light boxes, letters or car wash signage.
This is exactly the part Aspera handles: station structures and branding. We design, produce and install price signs, fascias, column cladding, signage and canopy lighting. We do not build complete fuel stations. Dispensers, tanks and fuel installations remain the responsibility of other contractors.
Checklist: what to check before a brand change
Walk around the station with the list below and take photos of each element. Ideally from two distances: from the road and close up.
1. Price sign
- Are the structure and foundation in good condition (corrosion, cracks, leaning)?
- How many products does the sign show, and will the fuel offer under the new brand be the same?
- Are the displays legible from the road by day and after dark?
- How tall is the sign and where does it stand relative to the entrance?
We make price signs in a modular design, in RAL colours, with embossed pictograms. The displays are controlled with a manual controller, a remote control or from a computer. You can read more about the displays themselves on the LED fuel price displays page.
2. Canopy and fascia
- What are the fascia dimensions, and does it have a channel for LED lighting?
- Does the canopy structure need repair before a new fascia is mounted on it?
- Do the new brand’s requirements also cover the fascia profile, or only the colours and logo?
We make canopy fascias from folded 3 mm aluminium sheet in RAL colours. The available versions are: flat, with an LED channel, with a central LED channel, Power, with a flat overlay and with a profiled overlay. The variant is chosen to suit the existing structure and the requirements of the new identity.
3. Canopy column cladding
- What condition is the current cladding in (dents, discolouration, impact marks)?
- Is the colour of the columns part of the new brand’s brand book?
We make column cladding from aluminium sheet, without visible fasteners. We roll the sheets on our own rolling machines.
4. Directional and information signage
- Can drivers see the entrance and exit straight away?
- Are the zones marked: dispensers, shop, car wash, parking, vacuum cleaners?
- Do the boards carry the colours and logos of the previous brand?
At this stage it is easy to overlook small items. These may be stickers on the dispensers, boards with the station rules or old signs on the building. List them all. See also station directional signage.
5. Lighting
- Is the lighting of the bays under the canopy even?
- Are the fascia and price sign illuminated, and does the new identity require it?
A brand change is a good moment to sort out the canopy lighting as well. It can then be done in one installation together with the fascia.
6. Building and additional elements
- The building frieze or fascia, light boxes, letters, car wash signage and canopies over vacuum cleaners.
- Will marks from old letters or light boxes remain on the façade?
7. Documents and new brand requirements
- The brand book or fuel supplier guidelines: colours (ideally in RAL), logo dimensions, placement rules.
- Documentation of the existing structures, if the previous owner handed it over.
- The documents on the basis of which the price sign was erected (building permit or notification).
Replace or adapt?
Not every element has to be replaced. Four questions make the decision easier:
- Technical condition. Is the structure sound? A corroded element should not get new graphics.
- Compliance with guidelines. Do the dimensions and proportions allow the new logo to be placed correctly?
- Colour and material. Can the new brand’s colours be achieved on the current surface?
- Lighting. Does the new identity require lighting that the current element does not have?
It is worth making the final decision after an inspection and measurements, because not everything is visible in photos. A preliminary assessment can be made remotely from photos, and the details agreed during a site visit. Sometimes it is enough to refresh individual elements, and sometimes it is better to change the image of the whole site.
Formalities
Simply changing the graphics on existing elements is a different situation from erecting a new price sign. A few rules are worth knowing before you decide (the following refers to Polish law):
- According to the case law of the administrative courts, a free-standing advertising device permanently fixed to the ground is a structure. It therefore usually requires a building permit.
- Installing advertising boards and devices generally requires a notification (Art. 29(3)(3)(c) of the Polish Construction Law). The exception is illuminated advertising outside built-up areas.
- If the municipality has adopted a landscape resolution, it may define the dimensions, number and appearance of business signs and boards.
We write more about this in the article landscape resolutions and advertising at fuel stations, car washes and inspection stations. Confirm the formalities for a specific plot with a designer or at the local authority.
How to plan the work so the station keeps operating
A brand change usually takes four steps:
- Photos and site visit. An inventory of the elements from the list above and measurements.
- Scope and graphic design. A visualisation of the station in its new colours, setting out what we replace and what we adapt.
- Production. The elements are made in our plant: CNC laser and plasma cutting, bending on press brakes, sheet rolling, robotic welding, thermoforming of letters. On site, mainly installation remains.
- Installation. The order is agreed with the station owner. For example, the price sign can be replaced first and then the fascia, so that several zones are not closed at the same time.
If the contract with the new brand has a fixed start date, give it at the beginning of the conversation. The whole schedule is then planned from that date.
Where to start
Prepare for the first conversation:
- photos of the station from the road and close up (price sign, fascia, columns, signage),
- the location of the site,
- the brand book or guidelines of the new brand,
- which elements you want to keep and which to change.
See our fuel station projects and the scope of the fuel station modernisation and rebranding service. We handle design, production and installation in one company, so one team is responsible for the whole.
Let’s talk about your station’s brand change
Frequently asked questions
Where to start the brand change of a fuel station you have taken over?
With a review of the elements visible from the road: the price sign, canopy fascia, column cladding, signage, lighting and façade. Take photos of each and collect the new brand’s guidelines. On this basis, you decide what to replace and what to adapt.
Does the price sign have to be replaced when changing brand?
Not always. It depends on the condition of the structure, the number of products shown and the requirements of the new brand. It is best decided after an inspection.
Does a station brand change require formalities?
In Poland, erecting a new free-standing price sign permanently fixed to the ground usually requires a building permit. Installing advertising boards and devices generally requires a notification. You also need to check whether the municipality has a landscape resolution. Confirm the details for a specific plot with a designer or at the local authority.
Does Aspera build fuel stations?
No. We deal with fuel station structures and branding: price signs, canopy fascias, column cladding, signage and lighting. We design, produce and install these elements.
What are fuel station canopy fascias made of?
Folded 3 mm aluminium sheet in RAL colours. Flat versions are available, as well as versions with an LED channel, with a central LED channel, Power and with a flat or profiled overlay.