Touchless car wash modernisation – how to prepare (checklist)
In short: start a touchless car wash modernisation by reviewing what customers see from the road and from the bay. That means the parapet with the logo, wash bay partitions, column covers, roof, lighting and entrance signage. For each element, assess its condition and decide whether refreshing it is enough or whether it needs replacing. Plan the work so that the car wash can stay open for as long as possible.
A car wash that stood out in the area a few years ago loses its freshness over time. Banners fade and the parapet lighting only works in places. A new site with bright lighting and a clear logo opens nearby. A visual modernisation lets you regain that effect without rebuilding the car wash from scratch.
Visual modernisation vs. washing technology
A car wash modernisation usually covers two areas:
- washing technology: pumps, programmes, payment systems,
- structure and appearance: parapet (fascia), partitions, column covers, roof, lighting, signage.
Aspera deals with the second area. We design, manufacture and install car wash structures and enclosure elements together with the branding. We do not supply washing technology. If you are also changing the technology, it is worth aligning both schedules so that you do not have to close the bays twice.
Checklist: reviewing the car wash before modernisation
Walk around the car wash and photograph every element: from the road, from the entrance and from inside the bay.
1. Structure and roof
- Is there visible corrosion or damage on the steel structure?
- Is the roof cladding watertight and in good condition?
- Is the number of bays going to change, e.g. by adding a bay or a canopy over the vacuums?
We make steel structures from galvanised steel under a Factory Production Control system according to EN 1090-1 (TÜV NORD certificate). See also car wash roofing.
2. Parapet (fascia) with logo
- Is the parapet clean, without discolouration or deformation?
- Does the lighting work along its entire length?
- Are the logo and name legible from the road, also after dark?
The parapet is the most visible element of a car wash. We make car wash fascias from 3 mm powder-coated aluminium sheet with LED-illuminated graphics. PMMA letters are vacuum-formed. The logo can be custom designed.
3. Wash bay partitions and banners
- Are the banners faded or frayed?
- Do the instructions on the banner describe the current programmes and payment methods?
- Is the graphic design consistent across all bays?
Customers look at the partitions throughout the wash. If the car wash has new programmes or new payment methods, the instructions on the banner should show this. We print partition banners on both sides using solvent printing. They have two welded tunnels, are reinforced by welding and fitted with eyelets. The graphics can be chosen from ready-made designs or ordered as a custom design. Another option is rigid partitions made of composite panels, without graphics. The strong chemicals used at car washes affect the durability of any print, so it is worth planning banner replacement on a regular cycle.
4. Column covers and bumpers
- Do the column covers have dents or impact marks?
- Are there bumpers at the entrances?
Column covers and contour lighting tidy up the look of the bays. Bumpers protect the structure from impacts when vehicles drive in.
5. Lighting
- Is the bay lighting even?
- Does the car wash have contour lighting on the fascia and columns?
- Is the site visible from the road after dark?
Good lighting affects washing comfort and whether the site stands out after dark. Lighting is best modernised together with replacing the parapet.
6. Identity and signage
- Is there a clear advertising pylon or sign at the entrance?
- Can drivers see where to enter, where the exit is and where the vacuums are?
- Are the colours and logo consistent on the parapet, partitions and pylon?
7. Bay surroundings
- Grates with mat clips, holders, accessories at the vacuums.
- Canopies over the vacuums, if there are none.
What scope of modernisation to choose?
The result of the review usually points to one of three options:
- A refresh. New banners, repair of the lighting, replacement of individual covers. This works when the structure and parapet are in good condition.
- Replacing key elements. A new parapet with an illuminated logo, column covers and partitions. This option is for a site that works well but looks older than the competition.
- A new image for the whole car wash. A consistent change of parapet, columns, partitions, lighting and signage, often combined with a change of name or colour scheme.
For each option you receive a visualisation of the car wash with a proposed scope of work. This lets you see how the site will look before you decide.
How to plan the work so the car wash keeps running
We plan the modernisation so that the car wash can stay open for as long as possible during the work. This is helped by:
- production in our plant: parapets, covers and letters are made in the workshop, so mainly installation remains on site,
- installation in stages: bays are taken out of service one after another rather than all at once,
- coordination with the technology: if you are replacing washing equipment at the same time, both teams work in the same time window.
We handle design, production and installation in one company, so one team is responsible for the whole job.
What to prepare for the first conversation
- Photos of the car wash from the road, from the entrance and from the bays.
- The location of the site and the number of bays.
- Which elements you want to change and which to keep.
- Logo and colours, if the car wash has its own identity.
- The planned date of the work.
See our car wash projects and the touchless car wash modernisation service.
Let’s talk about modernising your car wash
Planning a new car wash instead of a modernisation? See our touchless car wash enclosures and get in touch about a new investment.
Frequently asked questions
Where should a touchless car wash modernisation start?
With a review of the elements visible to customers: the parapet with the logo, wash bay partitions, column covers, roof, lighting and entrance signage. Take photos from the road and from the bays, then decide what just needs refreshing and what needs replacing.
Does a car wash modernisation include the washing technology?
Not in our scope. Aspera handles the structure, enclosure and branding of the car wash including installation: parapets, partitions, column covers, roofing, lighting and signage. Washing technology is supplied by its manufacturers.
Can the car wash stay open during the modernisation?
We plan the modernisation so that the car wash can stay open for as long as possible during the work. The elements are made in our plant, and installation can be carried out in stages, bay by bay.
What is a car wash parapet made of?
3 mm powder-coated aluminium sheet with LED-illuminated graphics. PMMA letters are vacuum-formed.
What wash bay partitions can be used?
Banners printed on both sides using solvent printing, with two welded tunnels, reinforced by welding and fitted with eyelets, or rigid partitions made of composite panels, without graphics.